Analysis and Research on the Safe Operating Environment of Smelting Equipment
Jinduicheng Molybdenum Co., Ltd., Weinan 714100, China
| Abstract: | As one of the high-risk industries, the smelting industry involves many operational and operational risks. Smelting equipment carries the main safety risks, and its safe operation is crucial. The operating environment of smelting equipment is relatively complex and harsh, and the probability of accidents and failures caused by equipment reasons is high, resulting in significant economic losses and personnel casualties. Therefore, the safe operation of smelting equipment is of great significance for improving operational efficiency, ensuring the health of workers, protecting the environment, and enhancing the competitiveness of enterprises. This article analyzes the safe operating environment of smelting equipment, explores the main environmental characteristics and potential risks such as high temperature, high pressure, toxic and harmful gases, and dust pollution. Based on the operational risks of smelting equipment, safety measures for the current operating environment are evaluated, and corresponding application strategies and improvement measures are proposed. Through practical application analysis, the application effect of these strategies in actual production is demonstrated. As a fundamental condition for equipment operation, a safe operating environment is effectively managed and controlled through a management system that includes risk analysis and assessment, investigation and treatment, emergency prevention, and continuous improvement. This reduces the operational risks of smelting equipment and enhances its safe operating efficiency. |
| Keywords: | Smelting Equipment Risks; Environmental; Safety; Hazards |
| DOI: | 10.57237/j.wjese.2024.04.002 |
View:
Downloads:
收稿日期: 2024-09-06
接受日期: 2024-11-12
在线出版日期: 2024-12-23
参考文献
| [1] | Wang, J., & Chen, L. (2021). “High Temperature Materials for Metallurgical Applications: A Review.” Materials Science and Engineering, 34(2), 23-25. |
| [2] | Liu, Q., & Zhao, X. (2023). “Real-time Monitoring and Control Systems for Metallurgical Equipment.” Automation in Industry, 15(4), 18-19. |
| [3] | Yang, H., & Zhang, T. (2024). “Impact of Dust and Gas Emissions on Metallurgical Equipment Performance and Health Risks.” Environmental Protection, 22(1), 18-19. |
| [4] | Zhang, R., & Wang, H. (2020). “Advanced Techniques in Metallurgical Safety Management: Case Studies and Applications.” Safety Science, 18(6), 22-24. |
| [5] | Wang, H., et al. (2021). “CFD simulation of a venturi scrubber for fine particle removal: Influence of operating parameters.” Chemical Engineering Journal, 151. |
| [6] | Zhang, Y., et al. (2021). “Performance evaluation of baghouse filter materials for PM2.5 removal under different operating conditions.” Environmental Science & Technology, 56. |
| [7] | Zhou Qiang Research on the Reliability of Smelting Electrical Automation Control Equipment [J] light source Regarding Lighting, 2021 (05): 102. |
| [8] | Zhang, X., & Li, Y. (2022). “Analysis and Optimization of Safety Measures in Metallurgical Equipment.” Journal of Industrial Safety, 12(3), 32-33. |
| [9] | LIU Chuntao. Environmental Protection and Energy Saving Technology in Ironmaking and Metallurgy. Smart City Application. 2020, 4. |
| [10] | Zhang Wei, Li Qiang Intelligent management and maintenance of metallurgical production machinery and equipment Research [J] Automation and Instrumentation, 2022, 33(2): 56. |
| [11] | Wang Lei, Chen Hua Fault prediction of metallurgical production machinery and equipment based on big data Research on Testing and Health Management [J] Automation Instrumentation, 2023, 44(1): 23. |
| [12] | Li Ning, Guo Wei The Application of Automation Technology in Metallurgical Machinery Equipment Management Using research [J] Automation and Information Technology, 2023, 42(2): 36. |
| [13] | Sun Yanping Reliability Analysis of Electrical Automation Control Equipment [J] papermaking Equipment and Materials, 2020, 49(1): 31. |
| [14] | Li Hua, Zhang Wei Research progress on the recovery and comprehensive utilization technology of calcium carbide furnace exhaust gas Exhibition [J] Chemical Environmental Protection, 2023, 33(2): 13. |
| [15] | Zou Ge Research on Automation Debugging Technology and Application of Mechanical and Electrical Equipment [J] Innovation in Power Engineering Technology, 2022, 3(4): 13. |
| [16] | Zhou Qiang Research on the Reliability of Smelting Electrical Automation Control Equipment [J] light source Regarding Lighting, 2021 (05): 106. |
| [17] | Zhang Pugen A review of research on corrosion and leakage detection and evaluation of pressure pipeline valve [J]. Shanghai Chemical Industry, 2022, 47(06): 49. |
| [18] | Liu Ming Safety Management and Development of Mechanical Equipment in Metallurgical Engineering [J] Ye Ye Gold Management, 2023 (9): 6. |
| [19] | Zhang Yulong Standardization of Management and Maintenance of Steel Metallurgical Equipment Exploration [J] Volkswagen Standardization, 2022 (11): 65. |
