Current Research and Trend Analysis of Converter Support Mechanism
Steelmaking Division, CISDI Engineering Technology Co., LTD., MCC, Chongqing 401122, China
| Abstract: | The running quality of the converter referrs to the safety indexes as well as the other other is wear, impact, vibration and abnormal noise, etc., which is closed related to the supporting mechanism of the converter This paper systemically sorts out and analyzes the supporting mechanism of the converter in variant securities from the last center to the preset, and summarizes the characteristics of the supporting mechanism of the converter and the main factors that determine the running quality of the converter, especially the large scale converter The main factors that influence and determine the running quality of converter, especially large converter, are put forward for the first time by means of means of comparative comparative analysis The results show that six typical under suspension support mechanisms are mainly used in variables countries in the world today; The main factors affecting the running quality of converter are: 1) the components of the suspension mechanism, 2) the number of the suspension mechanism, and 3) the layout of the suspension mechanism The technical progress in these three aspects and how to use them relatively are the development trend and direction of inproving the running quality of converter. |
| Keywords: | Converter; Support Mechanism; Running Quality; Vibration and Abnormal Noise |
| DOI: | 10.57237/j.mse.2025.01.001 |
View:
Downloads:
收稿日期: 2025-01-09
接受日期: 2025-02-12
在线出版日期: 2025-03-13
参考文献
| [1] | Yu Yang, Wang Xiang, Zeng Ming, Yang Ningchuan, Ai Lei, Zhao Yunfeng, Wang Jian. a self-adaptive suspension structure of converter: China, 202110668132.1 P]. 2022-05-10. |
| [2] | Huang Qiming, Wang Xiang, Yu Yang, Yan Fei, Xu Jie, Gao Zhan.. Design theory and engineering practice of four-point suspension large converter [A] Metallurgical China, 2013: 41. |
| [3] | Huang Qiming, Wang Xiang. Layout structure of four-point connecting rod suspension device for the converter: China, 201210291941.6 [P]. 2014-01-22. |
| [4] | Huang Qiming, Wang Xiang, Yu Yang. A connection device and optimal arrangement of a spatial turnover container: China, 201610569298.7 [P]. 2017-12-15. |
| [5] | Yu Yang, Wang Xiang, Huang Qiming. Prestressed baffle of plate pulling converter: China, 201520856894.4 [P]. 2016-03-09. |
| [6] | Huang Qiming, Tan Junfei, Yu Yang. A converter adaptive stop mechanism: China, 2008, 2009, 9959.5 [P]. 2009-07-15. |
| [7] | Yu Yang. Analysis and Countermeasures for Tilting Abnormal Sound of Three-point Ball Hinge Support Converter [A] Mechanical Engineer, 2016: 164. |
| [8] | Chen Jianxin, Li Shuqiang, Wang Xiaohong, Ma Zhouqiang, Guo Jie. Cause analysis and improvement measures for abnormal sound of converter tilting [J] Henan Metallurgy, 2008, 16 (4): 40. |
| [9] | Zhang Hongqiang. A new connecting device between converter body and trunnion ring [G] Practical Technology, 2010: 281. |
| [10] | Chen Deyong. Comprehensive evaluation of connection technology between large converter body and trunnion ring [B] Metallurgical Equipment, 2008, 172 (6): 55. |
| [11] | Zeng Ming, Huang Qiming, Wang Xiang. A converter block structure: China, 201420696630.2 [P]. 2015-03-11. |
| [12] | Chen Yan, Li Qiuyang, Zhang Chunhui. Two-fulcrum online repair technology for large converter [N/OL] Metallurgical Information Equipment Network, 2021-03-02 (1) [2023-0-10]. |
| [13] | KraSteffen, Wagner Frank. ANORDUNGGUM VERBINDEN EINER LAMELLE MIT EINEM TRAEINES KONVERTERS SOWIP KONVERTER MIT EINER SOLANORDUNG: European Patent Office, 16199546.9 [P]. 2017-05-24. |
| [14] | Zhu Fengyun. Large converter thin belt laminated plate connection suspension system [A] Industrial Technology, 2010 (11). |
| [15] | Steven E. Dew, Stephen Britio, Stephen Ritza. Repair of Algoma Steel's BOF Lamella Suspension [J] AISTech 2008 Processes (I). |
| [16] | Steven E. Dew, Stephen Ritza, Stephen Britio. Repair of Essar Steel Algoma's BOF Lamella Suspension [J] Iron&Steel Technology, 2008, 5 (12). |
| [17] | Danieli Corus, GSta, Michael Skorianz and Uazir Bezerra de Oliveira. BOF design improvements and upgrades [J] IRONMAKING AND STEEL, MILLENIUM STEEL 2019: 36. |
| [18] | Rudolf Grubel, RupertBerger, Bernhard N, Gerhard Lausbichle. Tilting converter: China, 93117357.4 [P]. 1996-04-03. |
| [19] | Zhao Jun. Practice case of emergency repair for connecting plate fracture of 150t converter support device of Bayi Iron&Steel Co., Ltd. [B] Xinjiang Iron&Steel, 2020: 156 (4) 53. |
| [20] | Song Xiaoyan. Technical features of 180tLD converter equipment of Shagang [J] Metallurgical Equipment, 2009 (2): 67. |
| [21] | Günther Staudinger, Peter Illecker, Ireneusz Staniewski, Ryszard Konieczny, Stefan Cichoński. INSTALLATION OF A 350T BOF CONVERTER AT ARCELORMITTAL POLAND [J]. ACIARIA STEELMAKING, 2014: 115. |
| [22] | Günther Staudinger, Andreas Hackl, Peter Illecker, Alberto Passon, Edo Engel, Walter Vortrefflich. DANIELI CONVERTER TECHNOLOGY NEW FULL-LINER COMPETENCE IN CONVERTER STEELMAKING [J]. Steelmaking Seminar, 2013: 1. |
| [23] | S. Torok (USA), G. Wimmer (Austria), G. Unterrainer (Austria), D. Vaillancourt (USA). Revamp of BOF Converters at AK Steel-Middletown Works Using Vaicon Link 2.0 Converter Vessel Suspension System [J]. IRON & STEEL TECHNOLOGY, 2021: 82. |
| [24] | Guo Hong. Development of new technologies and new materials for converter equipment [A] Steel making, 2009, 25 (1): 70. |
| [25] | Wen Ming, Wang Demin. A new and practical connecting device between converter body and trunnion ring [B] Baogang Technology, 2005, 31: 50. |
| [26] | Tu Min. The typical structure analysis of support device of converter body [A] Steel Research, 2012, 40 (1): 30. |
