Research on Digital Modeling Method of Triaxial Vibration System
1. State Key Laboratory of Mechanics and Control for Aerospace Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
2. Beijing Institute of Structure and Environment Engineering, Beijing 100076, China
| Abstract: | To meet the demand of providing basis for improving triaxial vibration system, it is necessary to extract the overall Frequency Response Function (FRF) matrix of triaxial vibration system from its digital model. The mechanical parts of triaxial vibration system is connected tightly which satisfy rigid connection assumption. The Jetmudsen FRF method is used to construct the overall frequency response function matrix of triaxial vibration system. The electrodynamic shaker (referred to as the shaker) is an important component of the three-axis vibration system, and its function is to provide the test bench with an excitation force in a certain direction. Therefore, it is necessary to define a large number of internal nodes on the shaker. The FRF matrix of shaker (including origin FRF matrix of internal nodes and joints, cross-point FRF matrix of internal nodes and joints) should be obtain to carry out the construction of overall FRF matrix of triaxial vibration system. It is difficult because the size of FRF matrix of shaker is too large. So a way to simplify the distributed loads exerting on the structure into multi-point concentrated loads is proposed, it can be used to obtain the simplified digital model of the electrodynamic shaker. Based study above, the overall frequency response function matrix of the triaxial vibration system is obtained, and the digital modeling of the triaxial vibration system is completed. |
| Keywords: | Triaxial Vibration System; Simplifying the Distributed Loads; Construction of Overall FRF Matrix |
| DOI: | 10.57237/j.mse.2023.01.002 |
View:
Downloads:
Received: 26 April 2023
Accepted: 25 May 2023
Published Online: 15 June 2023
References
| [1] | JETMUNDSEN, BJORN; BIELAWA, RICHARDL; FLANNELLY, WILLIAMG. American Helicopter Society, Journal Vol. 33 (Jan. 1988): 55-64. |
| [2] | 李世超, 高宏力. 基于频域子结构综合法的丝杠寿命实验台的动态特性研究[C]//中国工程机械学会. 第七届全国机械工程博士论坛论文集. [出版者不详], 2015: 290-297. |
| [3] | 胡海岩. 国防科工委"十五"规划教材 力学 机械振动基础[M]. 国防科工委“十五”规划教材 力学 机械振动基础, 2005. |
| [4] | 白斌, 白广忱, 费成巍等. 改进的混合界面子结构模态综合法在失谐叶盘结构模态分析中的应用 [J]. 工程力学, 2015, 32 (04). |
| [5] | 王威. 基于频响函数的子结构混合建模研究及实现 [D]. 华中科技大学, 2012. |
| [6] | 吴仕超, 蔡国平. 刚架结构频域子结构法的实验研究 [J]. 实验力学, 2011, 26 (02): 196-201. |
| [7] | 杨志强, 臧朝平, 张根辈. 电磁激振器与结构的耦合动力学特性分析 [J]. 机械制造与自动化, 2022, 51 (02): 9-11. |
| [8] | 张逸波, 齐晓军, 张丽新. 200kN振动台动圈建模与仿真分析 [J]. 航天器环境工程, 2009, 26 (03): 244-247. |
| [9] | 孟繁莹. 大型电动振动台动力学分析与数值模拟研究 [D].京工业大学, 2013. |
| [10] | 方政. 大型电动振动台动圈结构动力学建模与分析 [D]. 北京工业大学, 2018. |
| [11] | 夏天凉. 电动振动台有限元建模及其附加台面设计 [D]. 苏州大学, 2011. |
| [12] | 曾国英, 刘继光, 夏季. 三维振动台的仿真设计 [J]. 机械设计, 2005 (04): 46-48. |
| [13] | 向树红, 晏廷飞, 邱吉宝. 400kN振动台虚拟试验仿真技术研究 [J]. 航天器环境工程, 2003 (04): 25-33. |
| [14] | 谢耀, 李久芳. 线性功率放大器模型设计及其系统辨识[J]. 电子工业专用设备, 2011, 40 (10): 55-59. |
| [15] | 王红霞. 高频谐振功率放大器性能仿真分析 [J]. 实验室科学, 2021, 24 (06): 53-56. |
| [16] | 刘金亭. 基于谐波控制的双频带功率放大器设计与仿真实现 [J]. 信息与电脑(理论版), 2022, 34 (04): 198-200. |
Join the Editorial Board
We invite active, qualified and high profile scientists and researchers to join as Editorial Board Members.
Join UsBecome a Reviewer
Scholars with a strong interest in reviewing are invited to join the reviewer panel to ensure the quality of the research to be published.
Join Us