Distribution Mechanism of Asymmetric Axial Piston Pump
College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| Abstract: | Pump-controlled single-rod hydraulic cylinders are energy-saving and efficient, which is the development direction of hydraulic systems in the future. However, the flow imbalance caused by the unequal effective areas of the two chambers of single-rod hydraulic cylinders has always restricted the development and application of pump-controlled single-rod hydraulic cylinders. The flow rate of the inlet and outlet ports of the ordinary axial piston pump is equal and the flow rate of the large and small chambers of the single rod hydraulic cylinder does not match. In order to solve this problem, the ordinary axial piston pump is improved into an asymmetric axial piston pump, on this basis, the flow distribution mechanism of the asymmetric axial piston pump is explored, and the design theory of the asymmetric axial piston pump is improved. Theoretical analysis of the relationship between the angle of the distribution window of the asymmetrical axial piston pump and the area ratio of the single-rod hydraulic cylinder is carried out, and its mathematical model is derived. Design of valve plates for asymmetrical axial piston pumps to match single rod hydraulic cylinders with different area ratios. The physical model of the asymmetrical axial piston pump and the asymmetrical axial piston pump controlled single-rod hydraulic cylinder system was established in the computer simulation software AMESim. The simulation analysis of the inlet and outlet flow of the asymmetric axial piston pump under different working conditions and the matching of the asymmetric axial piston pump and the single-rod hydraulic cylinder with different area ratios. The simulation results show that the use of an asymmetrical axial piston pump can compensate the flow imbalance caused by the unequal effective areas of the two chambers of the single-rod hydraulic cylinder, so that the flow of the asymmetrical axial piston pump and the single-rod hydraulic cylinder can completely match. |
| Keywords: | Asymmetric Axial Piston Pump; Valve Plate; Single out Rod Hydraulic Cylinder; Flow Matching; AMESim |
| DOI: | 10.57237/j.mse.2022.01.005 |
View:
Downloads:
Received: 7 December 2022
Accepted: 13 January 2023
Published Online: 3 February 2023
Funding
| 1. | 国家自然基金项目《匹配不同面积比单出杆液压缸的轴向柱塞泵非死点过渡区配流理论与方法》 (51905369). |
References
| [1] | 权龙. 泵控缸电液技术研究现状、存在问题及创新解决方案 [J]. 机械工程学报, 2008, 44 (11): 87-92. |
| [2] | 赵升吨, 张宗元, 徐凡, 等. 电磁直驱式液压泵及其发展趋势 [J]. 液压与气动, 2014 (02): 1-9. |
| [3] | 蔡伟, 李慧, 戴民强, 等. 液压泵检测诊断技术的研究现状与发展趋势 [J]. 液压与气动, 2014 (08): 49-54. |
| [4] | 丁问司, 刘坤, 丁云柯. 阀控非对称伺服缸基于粒子群优化的模糊PID控制器研究 [J]. 液压与气动, 2017 (09): 17-23. |
| [5] | 李志鹏, 李一茹, 王君, 等. 轴向柱塞泵配流盘非死点过渡区特性优化 [J]. 机床与液压, 2022, 50 (15): 121-127. |
| [6] | Quan Zhongyi, Quan Long, Zhang Jinman. Review of energy efficient direct pump controlled cylinder electro-hydraulic technology [J]. Renewable and Sustainable Energy Reviews, 2014, (35): 336-346. |
| [7] | 杨迦迪, 赵斌, 武兵, 等. 变排量非对称轴向柱塞泵控制性能分析 [J]. 液压与气动, 2021, (2): 42-49. |
| [8] | 马艳斌, 赵斌, 郝云晓. 非对称泵控单出杆液压缸系统特性分析 [J]. 液压与气动, 2020 (08): 167-175. |
| [9] | 葛磊, 张晓刚, 权龙, 等. 变转速非对称泵直驱液压挖掘机斗杆试验研究 [J]. 机械工程学报, 2017, 53 (16): 210-216. |
| [10] | RAHMFELD R, IVANTYSYNOVA M. Displacement controlled Linear Actuator with Differential Cylinder a way to Save Primary Energy in Mobile Machines. [C] // Fifth International Conference on Fluid Power Transmission and Control, Ostrvav, Chech Re-public, 2001: 296- 301. |
| [11] | IVANTYSYNOVA M. Innovations in Pump Design What are Future Directions [C] //Proceedings of the JFPS Interrnational Symposium on Fluid Power, Toyama, Japan, 2008: 59 -64. |
| [12] | QUAN Long, YANG Yang, HOU Xuwei,. Simulation and experimental research on the axial piston pump with series three-windows in valve plate [C]. Proceedings of 2011 International Conference on Fluid Power and Mechatronics. 2011: 71-76. |
| [13] | Zhang Xiaogang, Quan Long, Yang Yang, et al. Output characteristics of a series three-port axial piston pump [J]. Chinese Journal of Mechanical Engineering, 2012, 25 (3): 498-505. |
| [14] | Huang Jiahai, Zhao Hu, Quan Long, et al. Development of an asymmetric axial piston pump for displacement-controlled system. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2014; 228 (8): 1418-1430. |
| [15] | Ge Lei, Quan Long, Li Yunwei, et al. A novel hydraulic excavator boom driving system with high efficiency and potential energy regeneration capability [J]. Energy Conversion and Management, 2018, 166: 308-317. |
| [16] | 景健, 权龙, 黄家海, 等. 非对称泵直驱液压挖掘机斗杆特性研究 [J]. 机械工程学报, 2016, 52 (6): 188-196. |
| [17] | 杨阳, 权龙, 杨敬. 轴向柱塞泵非止点配流窗口过渡区压力脉动特性分析 [J]. 机械工程学报, 2011, 47 (24): 128-134. |
| [18] | 王翔宇, 张红娟, 杨敬, 等. 非对称泵控装载机动臂特性研究 [J]. 机械工程学报, 2021, 57 (12): 258-266+284. |
| [19] | 王君, 王娇君. 非对称轴向柱塞泵的研究 [J]. 山西冶金, 2020, 43 (01): 21-22. |
| [20] | 徐兵, 张军辉, 杨华勇, 等. 轴向柱塞泵孔槽结合配流方式多目标驱动正向设计 [J]. 农业机械学报, 2013, 44 (07): 279-285. |
Join the Editorial Board
We invite active, qualified and high profile scientists and researchers to join as Editorial Board Members.
Join UsBecome a Reviewer
Scholars with a strong interest in reviewing are invited to join the reviewer panel to ensure the quality of the research to be published.
Join Us