Analysis of Mechanical Performance and Application of Composite Plates with Special Curved Surfaces
1. College of Civil Engineering, Henan University of Technology, Zhengzhou 450001, China
2. China Construction Science and Technology He’nan Co., Ltd., Zhengzhou 450004, China
| Abstract: | Taking the canopy project of Zhengzhou South Railway Station as an example, based on ABAQUS software, the mechanical performance of special-shaped curved laminated plate under three working conditions, such as hoisting condition, transportation condition and stacking condition, is analyzed. In this paper, the design and production process of special-shaped curved laminated plate are studied. The simulation results show that: under the condition of demoulding, the spacing of truss bars does not control the deflection caused by demoulding, and the member does not produce large displacement under different spacing arrangement of truss bars; It is better to reduce the stacking layers of laminated plates by using four point support mode than by changing the support mode. Because of the large curvature, short age and too many stacking layers, the deflection of the laminated plate will be too large. Even if the support method is adopted on both sides, the excessive deflection is still not suitable for engineering use. Through the research on the mechanical performance of special-shaped curved composite plate under three different working conditions, the optimal truss reinforcement spacing and support mode of special-shaped curved composite plate are obtained, which has high engineering application value. |
| Keywords: | Prefabricated Station Canopy; Special Curved Composite Plate; Finite Element Analysis |
| DOI: | 10.57237/j.cear.2024.01.002 |
View:
Downloads:
Received: 28 December 2023
Accepted: 4 March 2024
Published Online: 11 March 2024
References
| [1] | The Application of Parametric Design in the special-shaped surface concrete building [J]. Song Jianing, GUO Shuqi, ZHU Tongran. Building Construction. 2019(09). |
| [2] | WU Fangbo, Li Bo, Wen Jun, Qin Hao, Zhou Xuhong. Test of a new double-sided floor with detachable truss ribs [J]. Journal of Building Science and Engineering, 20, 37(02): 27-34. |
| [3] | WANG Jun, TIAN Chunyu, Yang Sizhong, ZHU Fengqi, ZHANG Zhonglin, Li Yang, SHI Haiqing, Zhou Yihang. Experimental study on seismic performance of integrated concrete shear wall with longitudinal ribbed composite assembly [J]. Building Structures, 2021, 51(05): 1-7. |
| [4] | ZHAO Depeng, Zhou Jian, Tian Chunyu, Pan Binghong, Liu Rong. Calculation and Analysis of seismic performance of prefabricated shear wall structures with prefabricated built-in outer parapet [J]. Journal of Building Structures, 2019, 51(05): 17-26. |
| [5] | LIAO Zhiqiang, Ni Jiagui, YU Dayou, Chen Jun, Liao Zhenying, Chen Fuliang. Experimental study on flexural performance of new precast integrated slab [J]. Building Structures, 2021, 51(05): 92-97. |
| [6] | Experimental study on carbonization performance of concrete joint surfaces of prefabricated structures [J]. Building Structures, 2021, 51(05): 126-132+140. |
| [7] | WANG Yanwu, Wu Qingbo, Zhang Shilian, Du Shunyu, Faith to Righteousness. Study on prefabricated external prestressed one-shape anchoring Device [J]. Building Structures, 2021, 51(02): 125-130+102. |
| [8] | Bu Tao. The Application of prefabricated architecture in modern urban Architecture [J]. Building Structure, 2019, 50(24): 160. |
| [9] | Wei Jinqiao, Hu Kui, Meng Xu. Study on the properties of single grade porous ceramite concrete and its application in prefabricated prefabricated partition wall [J]. Building Structure, 2020, 50(S2): 473-477. |
| [10] | Xin Nie, Xinyi Zhou, Liangdong Zhuang. Finite element analysis and Bearing capacity calculation of slotted concrete composite slabs [J]. Journal of Building Structures, 2024, 45(04): 216-225. |
| [11] | Yang Yue, Jiang Xuewei, Nie Xin et al. Experimental study on the mechanical behavior of slotted compacted concrete laminated slabs [J]. Journal of Building Structures, 2023, 44(07): 142-151. |
| [12] | JIANG Y X, CHEN H B, NIE X, et al. Experimental study on bond and anchorage of steel bars in precast concrete structures with new-to-old concrete interface [J]. Engineering Structures, 2021, 247: 113086. |
| [13] | ZHAO Guangjun, Zhao Lei, Li Wenjie, et al. Research on Key Problems of flexural performance Test and design of prestressed concrete ribbed Composite slabs [J]. Journal of Building Structures, 2019, 44(09): 171-182. |
| [14] | DING Kewei, CHEN Dong, LIU Yunlin, et al. Theoretical and experimental study on mechanical behavior of laminated slabs with new type joints [J]. China Civil Engineering Journal, 2015, 48(10): 64-69. |
| [15] | LIU Wenzheng, Cui Shiqi, Liu Chuanqing et al. Experimental and Theoretical Study on flexural Performance of prestressed concrete Steel truss Composite Slabs [J]. Journal of Building Structures, 2021, 42(08): 95-106. |
| [16] | YU Yongtao, Zhao Yong, GAO Zhiqiang. Experimental study on flexural behavior of reinforced concrete laminated slabs with single joint [J]. Journal of Building Structures, 2019, 40(04): 29-37. |
| [17] | HUANG Hailin, WU Fangbo, ZHU Mingqiao, et al. Experimental study on bending fatigue behavior of concrete composite slab with precast prestressed T-type rib panel [J]. Journal of Building Structures, 2016, 37(5): 233-241. |
Join the Editorial Board
We invite active, qualified and high profile scientists and researchers to join as Editorial Board Members.
Join UsBecome a Reviewer
Scholars with a strong interest in reviewing are invited to join the reviewer panel to ensure the quality of the research to be published.
Join Us